MFIO and Power Connections

MFIO and Power Connections

For the MFIO:

  1. Red – V+
  2. Black – 0V
  3. Blue – RS485_B
  4. White – RS485_A

 

For Power:

Please see the white markings on one section of the power cable ( it refers +V) and the pure black ( it refers -V)


    • Related Articles

    • Alarm Connection with MFIO

      Wire the ALARM ( C and NO) connections on the MFIO as per the attached diagram. For example, in the attached picture, you can see a connection made from the MFIO onto a 24 V alarm beacon. ​   Once the alarm system is connected - on the Mouldflo ...

    • MFTR: Power Requirements

      The Mouldflo Test Rig has the following power specifications: CEE 230 / 400 VAC , 10A (50 / 60Hz) Note: The pump requires 3-phase, whereas the onboard electronics only require a single phase.

    • M12 Connector Information

    • Procedure to replace the SSD on the MFTR v2

      Please find videos to replace the SSD : Part 1 - https://drive.google.com/file/d/1rI0JGeVT60gYGVaaR87WPZUhmmKS06St/view?usp=sharing Part 2 - https://drive.google.com/file/d/17W5uI_xmE-iN1wma4Yg0NZPAcjjHbu9K/view?usp=sharing Part 3 ...

    • Procedure to reflash the SSD on the MFTRv2

      Procedure to reinstall the OS: 1. Download the file onto a FAT32 USB drive on your computer File to put on a blank FAT32 USB: https://drive.google.com/file/d/1BRHMsEDttaS5Lc8WlHu_QQFLFgI0nENj/view?usp=sharing 2. Follow the following steps Plug in the ...