Procedure to replace the SSD on the MFTR v2
Please find videos to replace the SSD :
After replacing the SSD and putting back the side panels along with power, water and air connections, boot into software and do the below procedure to calibrate the touch
Related Articles
Procedure to reflash the SSD on the MFTRv2
Procedure to reinstall the OS: 1. Download the file onto a FAT32 USB drive on your computer File to put on a blank FAT32 USB: https://drive.google.com/file/d/1BRHMsEDttaS5Lc8WlHu_QQFLFgI0nENj/view?usp=sharing 2. Follow the following steps Plug in the ...
MFTR User Guide
User Guide for MFTR v2
MFTRv2: Water Valve(Return) maintenance procedure
Problem: If you find the "Water Valve(Return)" to be not working, please use the below procedure to hopefully resolve the issue. Potential Resolution: 1. Go to the MFTR configuration page as shown in the image below: 2. Under "VALVE STATUS", please ...
MFTR: Power Requirements
The Mouldflo Test Rig has the following power specifications: CEE 230 / 400 VAC , 10A (50 / 60Hz) Note: The pump requires 3-phase, whereas the onboard electronics only require a single phase.
MFTR : Wifi Printer Setup Guide
Please find the Wifi Printer Setup Guide for the Test Rig